Water-Side Control Actuator for Heating and Cooling Systems

• Customization: Available
• Temperature: High Temperature
• Standard: En13828
• Model NO.: A9-X
• Connection Mode: Clamps
• Power: Electric Power
• Material: Plastic
• Type: Balance Valve
• Transport Package: Carton
• Trademark: AIBOHOME
• Origin: China
• HS Code: 848180
• Production Capacity: 8000000

Product Description

A9-0,A9-1, A9-2, A9-3, A9-4 are motorized modulating actuator. It can out put astroke to push dynamic balancing valve accord to input signal ( analog signalor digital signal, they are easy to installation, and don't need any tools,only by hand and can installation in any angle. Dynamic balancing valve is suitfor pipe flow control with automatic and provides proportional control in HVACapplications. The compact design of this actuator makes it suitable forinstallation in confined spaces, such as fan coil, chilled ceiling, manifoldsetc.   

 

Keyfeatures

Ø   A9-0   operating voltage AC/DC24V DC 0-10V/2-10V control signal

Ø   A9-1   operating voltage AC/DC24V DC 0-10V/2-10V control signal with feed back Signal (0-10v/2-10v)

Ø   A9-2   operating voltage AC/DC24V with ModBUS function

Ø   A9-3   operating voltage AC/DC24V 3-position control signal

Ø   A9-4   operating voltage AC 230V 3-position control signal

Ø   Nominal force: 100N/150N/200N

Ø   LCD/LED identification of valve stroke, input voltage, outputvoltage

Ø   Direct mounting with union nut, no tools required, easy for installation

Ø   Basic Types complete with plug-in connecting cable, length 1.0m

Ø   Optional cable types cable length 1.5m, 2.5m and 4.5m

Ø   Halogen-free cables

Ø   Manual setup interface

Ø   Parallel connection of multiple actuators possible

Ø   Water stroke auto recognition

Ø   Valve stroke: 2-8mm

 

 

Modellist Description & Selection

No.	Model	Description	Output Signal	Nominal Force
1	A9-0	Input:10-10V(Default)/2-10V Valve Type: NC(Defalut)/NO Powersupply: 24V C/DC -30% - > 20% LCD show work status Control Type: Proportional control	One   output signal	100N/150N/200N 150N - default
2	A9-1	Input:10-10V(Default)/2-10V Valve Type: NC(Defalut)/NO Powersupply: 24V C/DC -30% - > 20% LCD show work status Control Type: Proportional control Feed back: 0-10Vdc/2-10v	0-10VDC   default /2-10v	100N/150N/200N 150N   - default
3	A9-2	Modbus/RTU Valve Type: NC(Defalut)/NO Powersupply: 24V C/DC -30% - > 20% LCD show work status Control Type: Proportional control Feed back: 0-10Vdc/2-10v	/	100N/150N/200N 150N   - default
4	A9-3	Valve Type: NC(Defalut)/NO Powersupply: 24V C/DC -15% - > 20% LED show work status Control Type: 3-position	none   output signal	150N/200N 150N   - default
5	A9-4	Valve Type: NC(Defalut)/NO Power supply: 90-250V AC/DC -15% - >   20% LED show work status Control Type: 3-position	none   output signal	150N/200N 150N   - default
General Character:    Connection:   M30*1.5mm Cable   length : 1M Stroke:   2-8mm auto recognition stroke Water   Proof Level: IP54 Manual   Reset

 

Self- Calibration Program

During Commissioning and whenever the operating voltage is switchedon, Led will flash, The A9-x runs a self-calibration routine.(Valve stroke0->max. stroke ->Set point).Never intervene manually in this process.after self calibration, A9-x will action accord to input signal.

Othere details for the DIP setting and wire Diagram please contact us by E-mail.

 

Other more details please sent Email to ask about the manual book 
Aibohome motorized modulating actuator best use with Aibohome balance valve body(PICV) 






Quality Control

 

Hot forge

 

Our brass valve is produced by forging, through forging the valve product strength is greater, no porosity, can effectively prevent the leakage of the valve body.

CNC Machining

Our products are processed by precision CNC machine tools, with high machining accuracy up to 0.1 micron. We have machining centers to meet customers' requirements for products with high coaxiality



 

Machining Inspection

 

In our machining process, each size needs to be strictly tested. Workers will conduct a self-inspection of their products every 2 hours, and QC will conduct a workshop inspection every 2 hours to ensure that the size of products fully meets the requirements of the drawings

Assembly Room

Our assembly shop USES the assembly line, the result of teamwork can guarantee the output of a large quantity of products.100% of the products on the production line need to pass the leak test. We use the pressure of 6-8bar to test each product. Only after passing the test can the products be packed into cartons.

FAQ

1. Can I request a sample order for a valve?

A: Certainly! We welcome sample orders to allow you to test and assess the quality of our products. We also accept mixed samples.

2. Is there a minimum order quantity (MOQ) for valve orders?

A: Yes, there is an MOQ. However, we have a low MOQ requirement. For specific quantity details, please contact us to negotiate.

3. How do I proceed with placing an order for a valve?

A: To begin, please inform us of your requirements or application. You can provide us with the item number, size, and desired order quantity. If the exact product is not available, you can provide us with a drawing.

Next, we will provide a quotation based on your requirements or offer our suggestions.

Once the price is confirmed, the customer can place a deposit for the formal order and confirm the sample if necessary.

Finally, we will arrange the production and delivery of the order.

4. Do you offer a guarantee for your products?

A: Yes, we provide a 3-year warranty for all our products.

5. What is your estimated delivery time?

A: The production time typically ranges from 35 to 45 days. However, if the samples need to be confirmed for the first time, the delivery time can be negotiated.